please dont rip this site

3D Printing / CNC extruding

3D printers add material rather than removing it (like CNC Mills or Lathes). This is done with a powder which is bonded together or with a melted plastic which is extruded (basically the love child of a CNC mill and a hot glue gun).

Stepper motors are commonly used to drive these printers because they are low cost and require no position feedback.

UP! 3D by

The UP! 3D printers are user friendly, and the UP! 3D Plus and Plus 2 are well made metal frame printers with very reliable operation.

UP! 3D Plus 2

UP! Studio is generally easy to use and works pretty well. The lack of documentation and online help is an issue. Don't trust the automatic nozzle heigh detector. It's a good starting point, but you still need to check the height manually to be sure. Mine is 0.60 mm off consistently.  The auto bed leveling system is useless. Do it manually, clicking on each of the points, and then moving the little arrows up or down while feeling the friction of a sheet of paper under the nozzle. When printing anything with very fine parts, set the Extruded Width setting below the nozzle width, e.g. to 0.35 vs 0.4 or 0.5 in the advanced printing dialog, from the pull down under "Print" in the print dialog.

See also:

Also:

+
file: /Techref/3DPrinters.htm, 3KB, , updated: 2018/11/16 10:14, local time: 2024/12/22 05:48,
TOP NEW HELP FIND: 
52.14.49.59:LOG IN

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://massmind.ecomorder.com/Techref/3DPrinters.htm"> 3D Printing / CNC extruding</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

 

Welcome to ecomorder.com!

 

Welcome to massmind.ecomorder.com!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .