GRAFTABL + Loading Graphics Characters
     Loads graphics characters with ASCII codes greater than 127 
so that they can be used with the color/graphics adapter.
    VERSION
          PC-DOS 3.0+
	  MS-DOS equivalent: GRAFTABL (3.0+)
    TYPE
          External 
    SYNTAX
	  [d:][path] GRAFTABL [nnn][/STATUS]
    OPTIONS
	  [d:][path]	 Specifies the drive letter and path that
                         contain the GRAFTABL command file.
	  nnn		 Specifies the country code page
                         according to the following values:
                         437       United States (default)
                         860       Portugal
                         863       Canada (French)
                         865       Norway and Denmark
	  /STATUS	 Displays the number of the current
                         country code page.
    EXAMPLE
	  GRAFTABL 863
loads the table of graphics characters for the Canadian (French) 
code page. ASCII characters 128 through 255 will now be displayed 
in the graphics mode if the system has a color/graphics adapter.
    MESSAGES
	  Incorrect parameter
An unidentifiable parameter was specified. Check the parameters 
and retry.
	  No version of Graphic Character Set Table is already
          loaded
GRAFTABL has not been used to load character tables; no action is 
required.
	  Non-Standard version of Graphics Character Set Table is
	  already loaded
A previously loaded character set table has been modified; no 
action is required.
     nnn version of Graphic Character Set Table is now loaded
The code page numbered nnn has been loaded; no further action is
required.
    NOTE
     When this command has been executed, it increases the size 
of DOS by 1296 bytes. GRAFTABL may be used multiple times to 
change the loaded graphics characters. 
------------------------------------------------------------------
		  [For related topics, press R]
    SEE ALSO
          GRAPHICS Command
          MODE Command


  .