TRANSPARENT PRINT DATA COMMAND DEFINITION The Transparent Print Data command provides printing access to those characters which the printer normally defines as unprintable. These characters include decimal character codes 0, 7-15, and 27. LEGEND: Ec = [Ctrl] [P] [Esc] in DOS EDIT SYNTAX Ec&p#X [Transparent Print Data] # = Number of bytes of transparent print data Each transparent print data byte is interpreted as a single character code. The appropriate character is printed if one exists. If in Transparent Print Data mode, control codes such as LF, CR, and FF will be treated as print data. EXAMPLE Assuming the currently selected symbol set is PC-8, a control code of 14 which would normally give you a line feed will print as a musical note in Transparent Print Data mode. Ec&p1X [ASCII 14] Copyright Hewlett-Packard Co. 1993 The information contained herein is subject to change without notice. Hewlett-Packard shall not be liable for incidental or consequential damages in connection with the use of this material.
file: /Techref/language/pcl/lj1617.htm, 1KB, , updated: 2003/9/29 15:35, local time: 2024/12/23 17:47,
18.119.118.237:LOG IN
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://massmind.ecomorder.com/Techref/language/pcl/lj1617.htm"> language pcl lj1617</A> |
Did you find what you needed? |
Welcome to ecomorder.com! |
Welcome to massmind.ecomorder.com! |
.