please dont rip this site Prev Next

RaiseException info  Overview  Group

The RaiseException function raises an exception in the calling thread.

VOID RaiseException(

    DWORD dwExceptionCode,

// exception code

    DWORD dwExceptionFlags,

// continuable exception flag

    DWORD nNumberOfArguments,

// number of arguments in array

    CONST DWORD *lpArguments 

// address of array of arguments

   );

Parameters

dwExceptionCode
Specifies the application-defined exception code of the exception being raised. The filter expression and exception-handler block of an exception handler can use the GetExceptionCode function to retrieve this value.

Note that the system will clear bit 28 of dwExceptionCode. This bit is a reserved exception bit, used by the system for its own purposes. For example, after calling the RaiseException function with a dwExceptionCode value of 0xFFFFFFFF Windows displays a message indicating that the exception number is 0xEFFFFFFF.

dwExceptionFlags
Specifies the exception flags. This can be either zero to indicate a continuable exception, or EXCEPTION_NONCONTINUABLE to indicate a noncontinuable exception. Any attempt to continue execution after a noncontinuable exception causes the EXCEPTION_NONCONTINUABLE_EXCEPTION exception.
nNumberOfArguments
Specifies the number of arguments in the lpArguments array. This value must not exceed EXCEPTION_MAXIMUM_PARAMETERS. This parameter is ignored if lpArguments is NULL.
lpArguments
Points to an array of 32-bit arguments. This parameter can be NULL. These arguments can contain any application-defined data that needs to be passed to the filter expression of the exception handler.

Return Values

This function does not return a value.

Remarks

The RaiseException function enables a process to use structured exception handling to handle private, software-generated, application-defined exceptions.

Raising an exception causes the exception dispatcher to go through the following search for an exception handler:

  1. The system first attempts to notify the process’s debugger, if any.

  2. If the process is not being debugged, or if the associated debugger does not handle the exception, the system attempts to locate a frame-based exception handler by searching the stack frames of the thread in which the exception occurred. The system searches the current stack frame first, then proceeds backward through preceding stack frames.

  3. If no frame-based handler can be found, or no frame-based handler handles the exception, the system makes a second attempt to notify the process’s debugger.

  4. If the process is not being debugged, or if the associated debugger does not handle the exception, the system provides default handling based on the exception type. For most exceptions, the default action is to call the ExitProcess function.

The values specified in the dwExceptionCode, dwExceptionFlags, nNumberOfArguments, and lpArguments parameters can be retrieved in the filter expression of a try-except frame-based exception handler by calling the GetExceptionInformation function. A debugger can retrieve these values by calling the WaitForDebugEvent function.

See Also

ExitProcess, GetExceptionCode, GetExceptionInformation, WaitForDebugEvent


file: /Techref/os/win/api/win32/func/src/f69_13.htm, 5KB, , updated: 2000/4/7 11:19, local time: 2024/12/24 19:20,
TOP NEW HELP FIND: 
18.191.68.112:LOG IN

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://massmind.ecomorder.com/Techref/os/win/api/win32/func/src/f69_13.htm"> RaiseException</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

 

Welcome to ecomorder.com!

 

Welcome to massmind.ecomorder.com!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .