Prev Next
The WriteTapemark function writes a specified number of filemarks, setmarks, short filemarks, or long filemarks to a tape device. These tapemarks divide a tape partition into smaller areas.
DWORD WriteTapemark(
|
HANDLE hDevice, |
// handle to open device |
|
DWORD dwTapemarkType, |
// type of tapemarks to write |
|
DWORD dwTapemarkCount, |
// number of tapemarks to write |
|
BOOL bImmediate |
// return after write begins |
|
); |
|
Value |
Description |
|
TAPE_FILEMARKS |
Writes the number of filemarks specified by the dwTapemarkCount parameter. |
|
TAPE_LONG_FILEMARKS |
Writes the number of long filemarks specified by dwTapemarkCount. |
|
TAPE_SETMARKS |
Writes the number of setmarks specified by dwTapemarkCount. |
|
TAPE_SHORT_FILEMARKS |
Writes the number of short filemarks specified by dwTapemarkCount. |
If the function succeeds, the return value is NO_ERROR.
If the function fails, the return value is one of the following error codes:
|
Error |
Description |
|
ERROR_BEGINNING_OF_MEDIA |
An attempt to access data before the beginning-of-medium marker failed. |
|
ERROR_BUS_RESET |
A reset condition was detected on the bus. |
|
ERROR_END_OF_MEDIA |
The end-of-tape marker was reached during an operation. |
|
ERROR_FILEMARK_DETECTED |
A filemark was reached during an operation. |
|
ERROR_SETMARK_DETECTED |
A setmark was reached during an operation. |
|
ERROR_NO_DATA_DETECTED |
The end-of-data marker was reached during an operation. |
|
ERROR_PARTITION_FAILURE |
The tape could not be partitioned. |
|
ERROR_INVALID_BLOCK_LENGTH |
The block size is incorrect on a new tape in a multivolume partition. |
|
ERROR_DEVICE_NOT_PARTITIONED |
The partition information could not be found when a tape was being loaded. |
|
ERROR_MEDIA_CHANGED |
The tape that was in the drive has been replaced or removed. |
|
ERROR_NO_MEDIA_IN_DRIVE |
There is no media in the drive. |
|
ERROR_NOT_SUPPORTED |
The tape driver does not support a requested function. |
|
ERROR_UNABLE_TO_LOCK_MEDIA |
An attempt to lock the ejection mechanism failed. |
|
ERROR_UNABLE_TO_UNLOAD_MEDIA |
An attempt to unload the tape failed. |
|
ERROR_WRITE_PROTECT |
The media is write protected. |
Filemarks, setmarks, short filemarks, and long filemarks are special recorded elements that denote the linear organization of the tape. None of these marks contain user data. Filemarks are the most general marks; setmarks provide a hierarchy not available with filemarks.
A short filemark contains a short erase gap that cannot be overwritten unless the write operation is performed from the beginning of the partition or from an earlier long filemark.
A long filemark contains a long erase gap that allows an application to position the tape at the beginning of the filemark and to overwrite the filemark and the erase gap.
| file: /Techref/os/win/api/win32/func/src/f93_7.htm, 7KB, , updated: 2000/4/7 11:19, local time: 2024/11/7 13:56,
3.16.67.134:LOG IN ©2024 PLEASE DON'T RIP! THIS SITE CLOSES OCT 28, 2024 SO LONG AND THANKS FOR ALL THE FISH!
|
| ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://massmind.ecomorder.com/Techref/os/win/api/win32/func/src/f93_7.htm"> WriteTapemark</A> |
| Did you find what you needed? |
Welcome to ecomorder.com! |
Welcome to massmind.ecomorder.com! |
.