MODEMSETTINGS info  Overview  Group

The MODEMSETTINGS structure contains information about a modem’s configuration.

typedef struct modemsettings_tag {
    DWORD dwActualSize;               // size of returned data, in bytes
    DWORD dwRequiredSize;             // total size of structure
    DWORD dwDevSpecificOffset;        // offset of provider-defined data
    DWORD dwDevSpecificSize;          // size of provider-defined data

    // Static local options (read/write)
    DWORD dwCallSetupFailTimer;       // call setup timeout, in seconds
    DWORD dwInactivityTimeout;        // inactivity timeout, in tenths of seconds
    DWORD dwSpeakerVolume;            // speaker volume level
    DWORD dwSpeakerMode;              // speaker mode
    DWORD dwPreferredModemOptions;    // bitmap specifying preferred options

    // negotiated options (read only) for current or last call
    DWORD dwNegotiatedModemOptions;   // bitmap specifying actual options
    DWORD dwNegotiatedDCERate;        // DCE rate, in bits per second

    // Variable portion for proprietary expansion
    BYTE  abVariablePortion[1];       // variable-length data
} MODEMSETTINGS, *PMODEMSETTINGS, *LPMODEMSETTINGS;
 

Members

dwActualSize

Specifies the size, in bytes, of the data actually returned to the application. This member may be less than the dwRequiredSize member if an application did not allocate enough space for the variable-length portion of the structure.

dwRequiredSize

Specifies the number of bytes required for the entire MODEMDEVCAPS structure, including the variable-length portion.

dwDevSpecificOffset

Specifies the offset of the provider-defined portion of the structure, in bytes relative to the beginning of the structure.

dwDevSpecificSize

Specifies the size of the provider-defined portion of the structure, in bytes.

dwCallSetupFailTimer

Specifies the maximum number of seconds the modem should wait, after dialing is completed, for an indication that a modem-to-modem connection has been established. If a connection is not established in this interval, the call is assumed to have failed. This member is equivalent to register S7 in Hayes® compatible modems.

dwInactivityTimeout

Specifies the maximum number of seconds of inactivity allowed after a connection is established. If no data is either transmitted or received for this period of time, the call is automatically terminated. This time-out is used to avoid excessive long distance charges or online service charges if an application unexpectedly locks up or the user leaves.

dwSpeakerVolume

Specifies the volume level of the monitor speaker when the speaker is on. This member can be one of the following values:

Value	Meaning
MDMVOL_LOW	Low volume.
MDMVOL_MEDIUM	Medium volume.
MDMVOL_HIGH	High volume.

The MODEMDEVCAPS structure specifies the speaker volumes a modem supports. Actual volumes are hardware-specific.

dwSpeakerMode

Specifies when the speaker should be on. This member can be one of the following values:

Value	Meaning
MDMSPKR_OFF	The speaker is always off.
MDMSPKR_CALLSETUP	The speaker is on until a connection is established.
MDMSPKR_ON	The speaker is always on.
MDMSPKR_DIAL	The speaker is on until a connection is established, except that it is off while the modem is actually dialing.

dwPreferredModemOptions

Specifies the modem options requested by the application. The local and remote modems negotiate modem options during call setup; this member specifies the initial negotiating position of the local modem.

The dwModemOptions member of the MODEMDEVCAPSstructure specifies the modem options supported by the local modem. For a list of modem options, see the description of the MODEMDEVCAPS structure.

dwNegotiatedModemOptions

Specifies the modem options that are actually in effect. This member is filled in after a connection is established and the local and remote modems negotiate modem options.

The dwModemOptions member of the MODEMDEVCAPS structure specifies the modem options supported by the local modem. For a list of modem options, see the description of the MODEMDEVCAPS structure.

dwNegotiatedDCERate

Specifies the DCE rate that is in effect. This member is filled in after a connection is established and the local and remote modems negotiate modem modulations.

abVariablePortion

Contains provider-defined information, if any.

See Also

MODEMDEVCAPS 

  .