please dont rip this site

SX Embedded Controller Instruction

MOVB bit1,bit2

Description: Move bit2 into bit1
Operation: bit1 = bit2
Flags affected: none
Registers affected: bit1
Sources referenced: bit2
Cycles: 4
Opcode:
Actually compiles to: sb  bit2; clrb bit1; snb bit2setb bit1
Microchip PIC syntax: BTFSS bit2; BCF bit1; BTFSC bit2; BSF bit1 (doesn't work)
Notes:
file: /Techref/scenix/inst/movbbit1bit2.htm, 1KB, , updated: 2001/9/10 11:14, local time: 2024/12/23 04:46,
TOP NEW HELP FIND: 
18.118.24.176:LOG IN
 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://massmind.ecomorder.com/Techref/scenix/inst/movbbit1bit2.htm"> SX Instruction MOVB bit1,bit2</A>
After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?
 

Welcome to ecomorder.com!

 
Quick, Easy and CHEAP! RCL-1 RS232 Level Converter in a DB9 backshell
Ashley Roll has put together a really nice little unit here. Leave off the MAX232 and keep these handy for the few times you need true RS232!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .