please dont rip this site

Atmel AVR Microcontroller Basic Math Code Library

for Multiplication

Multiply 8 bits by 8 bits in software by http://elm-chan.org/ 

;-----------------------------------------------------------------------------:
; 8bit x 8bit unsigned multiply
;
; Register variables:
;  Call:  var10 = 8bit multiplicand
;         var11 = <don't care>
;         var20 = 8bit multiplier
;         lc    = <don't care> (high register must be allocated)
;
;  Result:var1[1:0] = 16bit result of var10 * var20
;         var20     = <not changed>
;         lc        = 0
;
; Size  = 9 words
; Clock = 64 cycles (+ret)
; Stack = 0 byte


mul08u:		sub	var11,var11	;initialize variables
		ldi	lc,9		; lc = 9;
		brcc	PC+2		;---- calcurating loop
		add	var11,var20	;
		ror	var11		;
		ror	var10		;
		dec	lc		;if (--lc > 0)
		brne	PC-5		; continue loop;
		ret

file: /Techref/atmel/avr/mul8x8sw-ec.htm, 1KB, , updated: 2007/9/14 16:45, local time: 2025/4/3 21:04,
TOP NEW HELP FIND: 
3.23.94.64:LOG IN
 ©2025 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://massmind.ecomorder.com/techref/atmel/avr/mul8x8sw-ec.htm"> Atmel AVR, atmega, Microcontroller, embedded controller, math 8x8 unsigned</A>
After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?
 

Welcome to ecomorder.com!

 
Quick, Easy and CHEAP! RCL-1 RS232 Level Converter in a DB9 backshell
Ashley Roll has put together a really nice little unit here. Leave off the MAX232 and keep these handy for the few times you need true RS232!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .