please dont rip this site

Disk Drives

PIC Specific IDE IO

http://www.ftdichip.com/FTProj.htm PIC or SX 28 to IDE (Compact Flash) interface with a USB interface chip on the other end.

http://www.barrymichels.com/ide/ Complete PIC to IDE interface. Uses RAM to buffer the data and reads FAT partitions.

How to connect an IDE disk to a microcontroller using an 8255 from Thomas Brandon [tom at psy.unsw.edu.au] by Omar Martinez [omartinez at hartford.com.ar] or Peter Faasse [faasse at nlr.nl] depending on who you talk to today. In html at http://minyos.its.rmit.edu.au/~s9906768/pic/IDE_to_8255.html

http://www.chipcenter.com/circuitcellar/february01/c0201ms1.htm "PIC A COMPACTFLASH CARD" interfacting a microcontroller to a CF and IDE

http://www.montanadesign.com/contest.html A contest to interface a PIC to and IDE hard drive.

http://home.clear.net.nz/pages/joecolquitt/0hdd.html Driving a Hard Drive motor with a PIC

Floppy Stepper Motors

DOS Filesystems

See also: (Remember: IDE is also known as ATA)

Hard Drive Specifications:

Specifications of the IDE interface

See:

Questions:

Comments:

See also:

Seealso:

Code:


file: /Techref/drives.htm, 13KB, , updated: 2013/7/22 16:42, local time: 2024/12/21 08:21,
TOP NEW HELP FIND: 
18.222.161.95:LOG IN

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://massmind.ecomorder.com/techref/drives.htm"> Disk Drives</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

 

Welcome to ecomorder.com!

 

Welcome to massmind.ecomorder.com!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .