please dont rip this site

Temperature Sensors

Pre-calibrated silicon junction devices: LM34D (F) or LM35D (C) or LM335A(K) are very nice (10 mV per F or C or Kelvin). Cost about $1. It's cheap, accurate, small and calibrated. Its the best solution to this kind of problem, so long as you have an ADC channel available.

Non-calibrated silicon junction devices: LM34/35 type sensors can be constructed out of a diode or a transistor wired as a diode. You'd have to calibrate it (~ 1 mV per C?). Cost $.06. The second best solution. The difference in voltage drop across a diode at two known currents is also related to temperature and is independent of anything except the physical properties of the junction (ie - all silicon diodes give the same result). A practical circuit will involve a switchable current source and an amplifier. A quad package of low cost 324 opamps would very probably suffice for all the active electronics.

Thermistors: used in a voltage divider circuit. Cost about $.50 for the thermistor. You'd have to calibrate it and program a linearization routine. It you have to do it with a digital pin, thermistors are easier because you can read it as a capacitor charge time.

Characterizing a thermistor with the Steinhart-Hart equation

Thermocouple wire: (type T is easiest). You'd have to have an amplifier with a gain ~ 200. Cost of the wire $.01 for a 1 cm piece. Type K & N can stand 1000 deg C. in the right atmosphere and packaging. Use a lot of shielding as they are very sensitive to noise

Home made thermocouple: You can twist a copper and iron or other metal wire together to make a thermocouple. You'd have to calibrate it. It will rust.

Microchip PIC uP Temperature senseing

Ubicom SX uP Temperature sensing

See also:

Archive:

Questions:


file: /Techref/io/sensor/temp.htm, 4KB, , updated: 2012/8/7 13:33, local time: 2024/3/28 11:54,
TOP NEW HELP FIND: 
44.204.218.79:LOG IN

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://massmind.ecomorder.com/techref/io/sensor/temp.htm"> Temperature Sensors</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

 

Welcome to ecomorder.com!

 

Welcome to massmind.ecomorder.com!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .