please dont rip this site

Rudy Wieser says:

I've got a 24C16 "programmer" here, that takes it's current from the Printer-port. I just wired 3 output-pins together thru BAT 85 diodes (0.3 volts voltage-drop). Other parts are two BAT 85 diodes to create two Open-collector outputs (for SDA & SCL) , and two 10 K-ohm resistors as pull-ups. The whole "circuit" is build into a connector, just leaving 4 threads going to my "adapter" ( a simple IC-socket ). It has not failed me yet !

file: /Techref/mem/eeprom/24x16.htm, 0KB, , updated: 2002/1/14 06:41, local time: 2024/12/21 18:35,
TOP NEW HELP FIND: 
3.145.202.60:LOG IN
 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://massmind.ecomorder.com/techref/mem/eeprom/24x16.htm"> mem eeprom 24x16</A>
After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?
 

Welcome to ecomorder.com!

 

Welcome to massmind.ecomorder.com!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .