please dont rip this site

PIC 10Fxxx DIP programming adapter

One of the interesting features of the 10Fxxx devices is their unusually small size that makes them ideal for certain applications where space is at a premium and where you don't need much code space. But the extreme small size also makes it difficult to experiment with it since you can't insert the SOT-23 package in the breadboard nor in the programmer. Though Microchip offers the device in an 8-pin DIP, it is not of much help since the pinout is different and you cannot use your existing programmer to program it unless you use ICSP. Or, you need to buy the PIC 10F Hobby Kit.

The alternative is to make the DIP adapter yourself. I used enamelled copper wires (Gauge around 33) to connect a 10F206 in SOT-23 package to a machine pin 8-pin socket. Attached is a photograph of what I made. The other file shows the connections between the PIC and the socket. NOTE THAT THE PIC IN THE CENTRE OF THE SOCKET IS UPSIDE DOWN. Since you would need only one for the purpose of trying out your design and code, making a PCB is not necessary unless you plan to make and sell them.

Any comments?

Regards,

Bala.Chandar at sanofi-aventis,c0m

Comments:

file: /Techref/microchip/10FAdapter.htm, 1KB, , updated: 2007/10/5 11:36, local time: 2024/12/21 17:43,
TOP NEW HELP FIND: 
3.139.239.25:LOG IN
 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://massmind.ecomorder.com/techref/microchip/10FAdapter.htm"> PIC 10Fxxx DIP programming adapter</A>
After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?
 

Welcome to ecomorder.com!

 

Welcome to massmind.ecomorder.com!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .