GetMapMode info Overview Group

The GetMapMode function retrieves the current mapping mode.

int GetMapMode(

HDC hdc	// handle of device context
);

Parameters

If the function succeeds, the return value specifies the mapping mode.

If the function fails, the return value is zero. To get extended error information, call GetLastError.

The following list describes the various mapping modes:

Value	Description
MM_ANISOTROPIC	Logical units are mapped to arbitrary units with arbitrarily scaled axes. Use the SetWindowExtEx and SetViewportExtEx functions to specify the units, orientation, and scaling that you want.
MM_HIENGLISH	Each logical unit is mapped to 0.001 inch. Positive x is to the right; positive y is up.
MM_HIMETRIC	Each logical unit is mapped to 0.01 millimeter. Positive x is to the right; positive y is up.
MM_ISOTROPIC	Logical units are mapped to arbitrary units with equally scaled axes; that is, one unit along the x-axis is equal to one unit along the y-axis. Use the SetWindowExtEx and SetViewportExtEx functions to specify the units and the orientation of the axes that you want. Graphics device interface makes adjustments as necessary to ensure the x and y units remain the same size (for example, if you set the window extent, the viewport will be adjusted to keep the units isotropic).
MM_LOENGLISH	Each logical unit is mapped to 0.01 inch. Positive x is to the right; positive y is up.
MM_LOMETRIC	Each logical unit is mapped to 0.1 millimeter. Positive x is to the right; positive y is up.
MM_TEXT	Each logical unit is mapped to one device pixel. Positive x is to the right; positive y is down.
MM_TWIPS	Each logical unit is mapped to one twentieth of a printer’s point (1/1440 inch, also called a “twip”). Positive x is to the right; positive y is up.