please dont rip this site

HAMES Laboratory Method:
Wet Mount Preparation of Skin for Microscopy

Materials and Equipment

  1. Clean glass slides
  2. Cover slips: 22x30 mm
  3. Paper towels
  4. Forceps
  5. Dissecting scissors
  6. Surgical or single edge razor blade
  7. 0.95 saline solution
  8. Pipettes
  9. Compound microscope
  10. Paper and pencil to record observations

Procedure

SKIN AND SCALES

Remove a glass slide and cover slip and wipe clean with a towel if moist or dirty. With a pipette add a drop or two of saline onto the center of the glass slide. Use the surgical blade or a clean, single edge razor blade to scrape off some mucus and the upper layer of the skin, remove and place in the drop of saline on the slide. Cover with a cover slip and gently press down on the cover slip to spread the mucus and remove air bubbles. Add more saline if need and wipe excess saline from around the borders of the coverslip. Place side on the stage of the microscope and examined under low, medium and high dry power for ectoparasites and/or obvious structural abnormalities.


file: /Techref/other/pond/tilapia/wetmountskin.htm, 1KB, , updated: 2009/7/13 07:44, local time: 2024/12/22 16:11,
TOP NEW HELP FIND: 
18.226.28.97:LOG IN

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://massmind.ecomorder.com/techref/other/pond/tilapia/wetmountskin.htm"> HAMES Laboratory Method: Wet Mount Preparation of Skin for Microscopy</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

 

Welcome to ecomorder.com!

 

Welcome to massmind.ecomorder.com!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .