Charge Pump DC to DC Power Converters

Vee (negative supply) from PIC PWM by David Covick

See also:

http://romanblack.com/smps/conv.htm A cheap circuit to make +13v from a +5v supply. Useful for some types of FLASH memory which require a higher programming voltage.

Archive:

List post "[EE]: How to build a cheap charge pump" 2 stage capacitor pump run from PIC PWM pin. See picture. +
List post "[EE]: How to build a cheap charge pump" Boost Switcher runs from PIC PWM output. Zenar regulation could be replaced with PIC A2D to vary PWM. +

file: /Techref/power/chargepumps.htm, 1KB, , updated: 2009/10/1 14:50, local time: 2024/12/27 00:20,

^{18.220.7.116:LOG IN}

©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?

Please DO link to this page! Digg it! / MAKE!

<A HREF="http://massmind.ecomorder.com/techref/power/chargepumps.htm"> Charge Pump DC to DC Power Converters</A>

Did you find what you needed?

Charge Pump DC to DC Power Converters

Welcome to ecomorder.com!

Welcome to massmind.ecomorder.com!