Re: Support for HP LJ 4000 and Typhoon printers

These printers have a "directory" that records the Macro ID numbers and what file name they are associated with in the FLASH or Hard drive options. The sample .INI file below with SIMM lines that add new codes for makeing this directory. After all the macros have been sent to the printer the print job should be closed then re-opened and the SIMMDIRInit line should be executed once, then the SIMMDIRLine line should be executed once for each form in the project, then the SIMMDIRExit line should be executed once and the print job closed again.

SIMM9Name=Disk /Dataproducts Typhoon LPE
SIMM9MacSize=65535
SIMM9Cap=32,000,000
SIMM9Erase=<Esc>&f103X<Esc>E
SIMM9Init=<Esc>|m<IDLEN>Y<ID><Esc>&f102X<Esc>&f100X
SIMM9Exit=<Esc>&f101X<0D><0A>
SIMM9DIRInit=<Esc>|s0X<0D><0A>
SIMM9DIRLine=<esc>|m<IDLEN>Y<ID><esc>&f104X<esc>&f<ID>y10X<0D><0A>
SIMM9DIRExit=<esc>|s1X<0D><0A>
SIMM9Test=Macro ID:<ID><Esc>|m<IDLEN>Y<ID><Esc>&f107X<0C>

  .