please dont rip this site

A simple RTOS for microcontrollers based upon concepts of FreeRTOS

This file is part of SimpleRTOS2

by Isaac Marino Bavaresco

This is file "SimpleRTOS\PortSAM3Internals.h"

/*============================================================================*/
/*
SimpleRTOS - Very simple RTOS for Microcontrollers - PIC32 port
v2.00 (2014-01-21)
isaacbavaresco@yahoo.com.br
*/
/*============================================================================*/
/*
 Copyright (c) 2007-2014, Isaac Marino Bavaresco
 All rights reserved.

 Redistribution and use in source and binary forms, with or without
 modification, are permitted provided that the following conditions are met:
     * Redistributions of source code must retain the above copyright
       notice, this list of conditions and the following disclaimer.
     * Neither the name of the author nor the
       names of its contributors may be used to endorse or promote products
       derived from this software without specific prior written permission.

 THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY
 EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
 DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*============================================================================*/
#if         !defined __PORTSAM3INTERNALS_H__
#define __PORTSAM3INTERNALS_H__
/*============================================================================*/
#include <asf.h>
#include "SimpleRTOS.h"
/*============================================================================*/
typedef unsigned long   intsave_t;
/*============================================================================*/
#define KERNEL_INTERRUPT_PRIORITY       (15)
#define MAX_SYSCALL_INTERRUPT_PRIORITY  (8ul)

//extern void RestoreInterrupts( intsave_t Status );
//extern intsave_t SaveAndDisableInterrupts( void );

/*============================================================================*/

#define USE_PSP

/*============================================================================*/

#if         defined USE_PSP

#define SAVE_CONTEXT()                                                          \
    __asm volatile(                                                             \
        "mrs    r12,basepri                 \n"                                 \
                                                                                \
        "mov    r0,%0                       \n"                                 \
        "msr    basepri,r0                  \n"                                 \
                                                                                \
        "mrs    r1,psp                      \n"                                 \
        "isb                                \n"     \
        "stmdb  r1!,{r4-r12}                \n" /* Save the remaining registers. */ \
                                                                                \
        "ldr    r0,=CurrentTask             \n" /*  r0  = &CurrentTask      */  \
        "ldr    r0,[r0]                     \n" /*  r0   = CurrentTask      */  \
        "str    r1, [r0]                    \n" /*  CurrentTask->sp = sp        */  \
                                                                                \
        "stmdb  r13!,{r14}                  \n"                                 \
                                                                                \
        :: "i"(( MAX_SYSCALL_INTERRUPT_PRIORITY << ( 8 - __NVIC_PRIO_BITS )) & 0xff ) : "r0"    \
        );

#define RESTORE_CONTEXT()                                                       \
    __asm volatile(                                                             \
        "ldmia  r13!,{r14}                  \n"                                 \
                                                                                \
        "ldr    r0,=CurrentTask             \n" /*  r0  = &CurrentTask      */  \
        "ldr    r0,[r0]                     \n" /*  r0   = CurrentTask      */  \
        "ldr    r1,[r0]                     \n" /*  sp  = CurrentTask->sp*/     \
                                                                                \
        "ldmia  r1!,{r4-r12}                \n"  /* Load the remaining registers. */    \
        "msr    psp,r1                      \n"                                 \
        "isb                                \n"                                 \
                                                                                \
        "msr    basepri,r12                 \n"                                 \
                                                                                \
        "bx     r14                         \n"                                 \
        );

#else   /*  defined USE_PSP */

#define SAVE_CONTEXT()                                                          \
    __asm volatile(                                                             \
        "mrs    r12,basepri                 \n"                                 \
                                                                                \
        "mov    r0,%0                       \n"                                 \
        "msr    basepri,r0                  \n"                                 \
                                                                                \
        "stmdb  r13!, {r4-r12}              \n" /* Save the remaining registers. */ \
                                                                                \
        "ldr    r0,=CurrentTask             \n" /*  r0  = &CurrentTask      */  \
        "ldr    r0, [r0]                    \n" /*  r1   = CurrentTask      */  \
        "str    r13, [r0]                   \n" /*  CurrentTask->sp = sp        */  \
                                                                                \
        "stmdb  r13!,{r14}                  \n"                                 \
                                                                                \
        :: "i"(( MAX_SYSCALL_INTERRUPT_PRIORITY << ( 8 - __NVIC_PRIO_BITS )) & 0xff ) : "r0"    \
        );

#define RESTORE_CONTEXT()                                                       \
    __asm volatile(                                                             \
        "ldmia  r13!,{r14}                  \n"                                 \
                                                                                \
        "ldr    r0,=CurrentTask             \n" /*  r0  = &CurrentTask  */      \
        "ldr    r0, [r0]                    \n" /*  r0   = CurrentTask  */      \
        "ldr    r13,[r0]                    \n" /*  sp  = CurrentTask->sp*/     \
                                                                                \
        "ldmia  r13!, {r4-r12}              \n"  /* Load the remaining registers. */    \
                                                                                \
        "msr    basepri,r12                 \n"                                 \
                                                                                \
        "bx     r14                         \n"                                 \
                                                                                \
        ::: "r0"                                                                \
        );

#endif  /*  defined USE_PSP */

/*============================================================================*/

static inline intsave_t __attribute((always_inline)) SaveAndDisableInterrupts( void )
    {
    register intsave_t  Status;

    asm volatile(
        "mrs    r0,basepri  \n"
        "mov    %0,r0       \n"
        "mov    r0,%1       \n"
        "msr    basepri,r0  \n"
        : "=r"( Status ) : "i"(( MAX_SYSCALL_INTERRUPT_PRIORITY << ( 8 - __NVIC_PRIO_BITS )) & 0xff ) : "r0"
        );

    return Status;
    }
/*============================================================================*/
static inline void __attribute((always_inline)) RestoreInterrupts( intsave_t Status )
    {
    asm volatile(
        "mov    r0,%0       \n"
        "msr    basepri,r0  \n"
        :: "r"( Status ) : "r0"
        );
    }
/*============================================================================*/
static inline void __attribute((always_inline)) ForceYield( void )
    {
    asm volatile( "svc 0" );
    }
/*============================================================================*/
#endif  /*  !defined __PORTSAM3INTERNALS_H__ */
/*============================================================================*/

file: /Techref/member/IMB-yahoo-J86/PortSAM3Internals.h.htm, 9KB, , updated: 2016/1/14 19:41, local time: 2024/11/17 21:50, owner: IMB-yahoo-J86,
TOP NEW HELP FIND: 
3.145.175.195:LOG IN

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://massmind.ecomorder.com/Techref/member/IMB-yahoo-J86/PortSAM3Internals.h.htm"> A simple RTOS for microcontrollers based upon concepts of FreeRTOS</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?