CryptGenRandom info  Overview  Group

The CryptGenRandom function fills a buffer with random bytes.

BOOL CRYPTFUNC CryptGenRandom(

Parameters

hProv

[in] A handle to the application’s CSP. An application obtains this handle using the CryptAcquireContext function.

dwLen

[in] The number of bytes of random data to be generated.

pbBuffer

[in/out] The buffer the function is to copy the random data to. This buffer must be at least dwLen bytes in length.

Optionally, the application can fill this buffer with data to use as an auxiliary random seed. This is explained further in the “Remarks” section.

Remarks

The data produced by this function is “cryptographically random.” It is far more random than the data generated by the typical random number generator such as the one shipped with your “C” compiler.

This function is often used to generate random initialization vectors and salt values.

Seeding the Random Number Generator

All software random number generators work in fundamentally the same way. They start with one truly random number, known as the “seed,” and then use an algorithm to generate a pseudo-random sequence of bits based on it. The most difficult part of this process is to get a seed that is truly random. This is usually based on user input latency, or the jitter from one or more hardware components.

If your application has access to a good random source, then it can fill the pbBuffer buffer with some amount of random data before calling CryptGenRandom. The CSP will then use this data to further randomize its internal seed. Failing to initialize the pbBuffer buffer before calling CryptGenRandom is acceptable.

Return Values

If the function succeeds, the return value is nonzero.

If the function fails, the return value is zero. To retrieve extended error information, use the GetLastError function.

The following table lists the error codes most commonly returned by the GetLastError function. The error codes prefaced by “NTE” are generated by the particular CSP you are using.

Example

See the “Example” section in the CryptSetKeyParam function.

See Also

CryptAcquireContext, CryptGenRandom, CryptSetKeyParam 

  .